Vista

VISTA-20326-3/8" Nylon Sna p-In box connector Fits 1/2" KO   For nonmetallic cable only .   Brand: VISTA Family: NYLON BOX CONNECTORS ...

Position depth Tabs. 1 x 1/2” knockouts (on bottom). 2 x 1/2” knockouts (1 on each side). Nonmetallic cable clamps.

2 1/8” Deep, 42.0 CU. IN. 14 x 1/2” knockouts (4 on bottom, 10 on sides). 8 x 3/4” knockouts (2 on bottom, 6 on sides).

VISTA -20154-  1 7/8" Deep Utility Box w/knockouts 4” High X 2 3/8” Wide 16.5 CU. IN.10 x 1/2” knockouts (2 on bottom, 2 on ends, 3 on each side). ...

2 1/2” Deep, 30.0 CU. IN. 14 x 1/2” knockouts (4 on bottom, 10 on sides). 8 x 3/4” knockouts (2 on bottom, 6 on sides).

Stock Code Vista_20103 Brand Vista Electrical Family UTILITY METAL BOXES COVERS Part No 54C1 UPC 20103 Case Quantity 25 Cross Refefe...

VISTA 20119 4-11/16" Square Cover-Blank

VISTA -20155- 2 1/2" Deep Box - 2 Gang w/Nailing Loop & Clamps   3” High x 3 3/4” Wide 25.0 CU. IN.Nailing loops & clamps. Holding prongs a...

VISTA -20152-2 1/2"Deep Box - 1 Gang w/Nailing Loop & Clamps    3” High x 2” Wide 12.5 CU. IN.Nailing loops & clamps. Holding prongs and pr...

2 1/2” DEEP DEVICE BOX WITH CLAMPS 3” High X 2” Wide 12.5 CU. IN.  External nailing loops. Position depth Tabs. Clamps for nonmetallic cables. Re...

PLASTIC DEVICE BOX-1-GANG WITH CLAMPS AND VAPOUR BARRIER 16 CU. IN.

VISTA -20165-  1/2" Deep Ceiling Pancake Box  4” diameter, 5.0 CU. IN.4 x 1/2” knockouts (on bottom). Brand: VISTA Family: OCTAGONAL BOX...

3” High x 5 1/2” Wide 37.5 CU. IN. Nailing loops & clamps. Holding prongs and prepositioned depth tabs. Clamps for nonmetallic cables.

3” DEEP DEVICE BOX WITH CLAMPS, Vista Electrical Box, 1004-LH

Description 3” High X 2” Wide 12.5 CU. IN. Flush mounted ears. Clamps for nonmetallic cables. Manufacturer Vista Electrical Case Qty 50 ...

VISTA -20131-Cable Protector Plate 1 1/2" x 3"Used to protect wires being run through studs when wire is within 1 1/4” from edgeof the stud.

VISTA -20135-Low Voltage "New Work " Wall BracketFor new construction - Single Gang. Used to install low voltage, Class 2 communicationoutlets duri...

VISTA -20130-F-clip switch box supportsFor dry wall application. Used to install device boxes with plaster ears in existingwalls where box cannot b...

2 1/8” Deep, 21.0 CU. IN. 1 x 1/2” knockouts (on bottom). 2 x 1/2” knockouts (1 on each side). Nonmetallic cable clamps.

NEMA 14-50R 50A RANGE OUTLET WITH 4 11/16”, COVER PLATE 4-wire outlet, 50A-120/240V, White * Approved for aluminum wire.

15A - 125V MALE PLUG WITH CABLE CLAMP3 wires Stock Code Vista_45411 Brand Vista Electrical Family Plugs & Connectors UPC 45411

Stock Code Vista_20115 Brand Vista Electrical Family UTILITY METAL BOXES COVERS Part No 52C1 UPC 20115 Case Quantity 10 Cross Refefe...

Stock Code Vista_20117 Brand Vista Electrical Family UTILITY METAL BOXES COVERS Part No 52C13 UPC 20117 Case Quantity 10 Cross Refef...

3” High x 7 3/8” Wide 50.0 CU. IN. Nailing loops & clamps. Holding prongs and prepositioned depth tabs. Clamps for nonmetallic and armoured cab...

VISTA 23015 Locking "in Use" Weatherproof Duplex and GFCI Cover - Clear 1Pack

Stock Code Vista_20315 Brand Vista Electrical Family Metal Boxes Connector Part No CI-806 UPC 20315 Case Quantity 50 Cross Refefence...

VISTA-20310-1 Scre w 3/8” box connector - Fits 1/2” KO   For nonmetallic and armoured cable.   Brand: VISTA Family: METAL BOX CONNECTORS...

PLASTIC OCTAGON BOX WITH CLAMPS AND VAPOUR BARRIER 26 CU. IN

tock Code Vista_20181 Brand Vista Electrical Family Vapour Barrier Boxes UPC 20181 Case Quantity 10

Stock Code Vista_20180 Brand Vista Electrical Family Vapour Barrier Boxes UPC 20180 Case Quantity 10

1 1/2” Deep, 15.0 CU. IN. 8 x 1/2” knockouts (4 on bottom, 4 on sides). 4 x 3/4” knockouts (2 on bottom, 2 on sides).

VISTA 20133 - 4 11/16" Square Cover - 1 Device - Raised 1/2"

15A - 125V WITH CLAMP Rubber - 3 wire Black

VISTA 46053 1Pack Pig-Tail Socket w/6" leads - Black rubber